Ublox NINA-B3 Series - Revision History

NINA-B3 series - System integration manual
UBX-17056748 - R13 Revision history Page 71 of 72
C1-Public
Revision history
Revision
Date
Name
Comments
R01
16-Nov-2017
apet, ajoh,
ajah, kgom
Initial release.
R02
22-Mar-2018
apet
Removed references to application development using Arm Mbed for
NINA-B30x open CPU modules.
R03
8-Jun-2018
apet, kgom
Updated Nordic SDK section to SDKv15 (section 2.2.1). Updated flashing
instructions in Flashing the NINA-B31 u-blox connectivity software (section 2.3).
R04
13-Sep-2018
ajoh, kgom
Changed the product status to Initial Production. Updated regulatory information
section with instructions on how to comply with regulatory restrictions for different
global markets (section 5). Added information about an FCC approved antenna
connector reference design in Appendix B.
R05
14-Feb-2019
ajoh, fbro,
mper
Added instructions for using s-center to flash NINA-B31 (section 2.3.1.1). Added
instructions on how to put an end product on the Japanese and Taiwanese markets
(section 5).
Added the software version for java script.
Added the new antenna type NINA-B3x6.
R06
16-Apr-2019
ajoh, fbro
Changed the product status to Initial Production. Updated Section 5 to reflect the
change with respect to SWD interface access, which applies for all NINA-B3
variants. Also added regulatory guidelines for the South Korean market. Updated
some values in recommended reflow profile.
R07
10-May-2019
fbro
Updated u-connectScript version to 1.0.1 and modified the product status for
NINA-B31x-20B to Initial Production.
Included information about Bluetooth MAC address (section 2.2.3). Corrected
information about UART flow control (section 3.5.1). Updated Single band antennas
(section 5.10.2).
R08
23-Sep-2019
mape
Updated some links to Nordic InfoCenter (section 2.2.1.1). Removed nRF Go Studio
and replaced with nRF Connect Programmer (section 2.4.1).
R09
20-Dec-2019
mwej
Added instructions on how to put an end product on the Brazilian, Australian, New
Zealand and South Africa markets (section 5).
R10
20-Apr-2020
mape
Removed all u-connectScript references. Included small correction in the chapter
Flashing the NINA-B31 u-blox software , section 2.3.1.2.2.
R11
8-Dec-2020
mape
Added information about NINA-B306-01B variant.
R12
30-Apr-2021
mape
Added signals for flashing in section 2.3.
Added information about how to use build configurations for nRF5 SDK for open
CPU in section 2.4. Included information about Zephyr configurations in section
2.2.2. Added information about mesh software in section 2.1.
Revised information describing the update of NINA-B3 software in section 2.1, and
removed inappropriate low frequency clock section.
R13
14-Jan-2022
hekf, mape
Updated names for ProAnt Ex-It series antennas and FlatWhip EOL in the Pre-
approved antennas list. Included minor correction to UART flashing example in
Updating both the SoftDevice and u-connectXpress connectivity software. Revised
Product testing and Handling and soldering information. Revised maximum ESD
sensitivity in ESD guidelines.