Ublox NINA-W1 Series - Software; NINA-W13 and NINA-W15 U-Connectxpress Software

NINA-W1 series - System integration manual
UBX-17005730 - R11 Software Page 15 of 55
C1 - Public
Software
2.1 NINA-W13 and NINA-W15 u-connectXpress software
NINA-W13/W15 stand-alone modules are delivered with embedded u-connectXpress software.
Using industry-standard AT commands, this is the software that manages the combination of
Bluetooth, Bluetooth Low Energy and Wi-Fi connectivity supported in NINA-W13 and NINA-W15
standalone modules, specifically:
• Wi-Fi (NINA-W13 and NINA-W15)
• Bluetooth (NINA-W15)
• Bluetooth Low Energy (NINA-W15)
For information about the features, capabilities and use of u-connectXpress software, see the
u-blox
Short range modules AT commands manual [1] and u-connectXpress user guide [6].
Typical examples of the applications and use cases supported by NINA-W13 and NINA-W15 series
modules include:
• Gateway connection of Bluetooth low energy sensors to the cloud over Wi-Fi or Ethernet
• Bridge communication over serial, Wi-Fi, PPP, or Ethernet interfaces
• Wi-Fi hotspot connection using Local Area Network or Tethering
• Device configuration using Bluetooth or Wi-Fi connected smartphones
• Secure cloud connection using TLS and MQTT protocols
Figure 6 shows the structure of the embedded u-connectXpress software delivered in NINA-W13 and
NINA-W15 standalone modules.
Figure 6: NINA-W13/W15u-connectXpress software structure