NINA-W1 series - System integration manual
UBX-17005730 - R11 Design-in Page 43 of 55
C1 - Public
NINA-W1 is manufactured with consideration to the specific standards for minimizing the occurrence
of ESD events. The highly automated process complies with the IEC61340-5-1 (STM5.2-1999 Class
M1 devices) standard. Consequently, the designer should implement proper measures to protect
from ESD events on any pin that may be exposed to the end user.
Compliance with standard protection level specified in the EN61000-4-2 can be achieved by including
the ESD protections in parallel to the line, close to areas accessible by the end user.
To Next Page
Loading...
