Ublox NINA-W106 - Supply interfaces

NINA-W1 series - System integration manual
UBX-17005730 - R11 System description Page 6 of 55
C1 - Public
System description
1.1 Overview
The NINA-W1 series of wireless and multiradio MCU IoT is suitable for industrial markets where
security is important. NINA-W1 includes the following stand-alone modules:
Model Description
NINA-W13 series Wireless MCU modules integrate a powerful microcontroller (MCU) and a Wi-Fi
radio for wireless
communication. NINA-W13x modules come with pre-flashed application software and
support
802.11b/g/n in the 2.4 GHz ISM band. Host systems set up and control the modules through an
AT
command interface to reduce the time and complexity of including Wi-Fi connectivity
into your application
designs. NINA-W13x modules offer top-grade security with secure boot
functionality that ensures that
applications start only with the original u-blox software, u-connectXpress.
NINA-W10 series Multiradio MCU modules
integrate a powerful microcontroller (MCU) and radio for wireless
communication. With open CPU architecture, NINA-W10 series modules are ideal for
advanced
applications that run on dual core 32-bit MCUs. The radio provides support for Wi-
Fi 802.11b/g/n in the
2.4 GHz ISM band, Bluetooth BR/EDR, and Bluetooth low energy communication. Leveraging
integrated
cryptographic hardware accelerators, NINA-W10 series modules offer top-grade security with secure boot
functionality that ensures that applications start only with the original u-blox software, u-connectXpress.
NINA-W15 series NINA-W15x modules have similar performance as NINA-W10x modules, but come with pre-
flashed
application software. Serving as a multiradio gateway, these modules provide support for Wi-
Fi
802.11b/g/n and dual-mode Bluetooth (Bluetooth BR/EDR low energy v4.2). Host systems
set up and
control the modules through an AT command interface to reduce the time and complexity of including Wi-
Fi connectivity into your application designs. NINA-W15x series modules offer top-grade security
with
secure boot functionality that ensures that applications start only with the original u-blox software
,
u-connectXpress.
NINA-W1 modules have full modular approval for Europe (RED), US (FCC), Canada (IC / ISED RSS),
Japan (MIC), Taiwan (NCC), South Korea (KCC), Australia / New Zealand (ACMA), Brazil (Anatel), and
South Africa (ICASA). The modules are qualified for professional grade operation and support an
extended temperature range of -40 °C to +85 °C.
⚠ NINA-W106 and NINA-W156 approvals are currently pending.