UC Logic Artisul D13 - Care and Maintenance; Cleaning and Cable Care

Artisul D13 Driver Version 1.0
35
VI. How to care for your ARTISUL
 Keep the U Pen and the ARTISUL LCD screen surface clean. Dust and dirt particles can stick to
the pen and cause excessive wear to the screen surface.。
 Wipe the LCD screen gently with a soft cloth.
 Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap
and warm water.
Note:
1. Unplug the ARTISUL cable before you begin cleaning your ARTISUL.
2. Never spray water or detergent directly in ARTISUL. It may cause damage to ARTISUL.
3. Never use strong solvent such as a thinner or alcohol for cleaning.
4. Never reverse or compress the ARTISUL cables and don’t bend it over 90∘. It may cause
damage to the cables.