Uconnect 4.3 User Manual

Changing the Map Coordinate Format
1. From the Home Screen, touch Where To? > Coordi-
nates >
> Format.
2. Select a format.
Speaking Commands
About Voice Commands
NOTE: The voice command feature is not available for
all languages or regions.
The voice commands allow you to use your navigation
system by speaking the words you see on the screen or by
speaking certain commands.
Activating Voice Command
• Press the Voice command button.
• The navigation system enters voice command.
About Icons and Tones
• The navigation system sounds two tones when it
enters and exits voice recognition mode.
• A
red icon appears in the upper-right corner of the
screen when the navigation system is not ready for
your command.
• Wait until the
icon is green to speak your
command.
Tips for Using Voice Commands
• Speak in a normal voice directed at the navigation
system.
• Speak commands as they appear on the screen.
• Respond to voice prompts from the navigation system
as needed.
• Speak “Exit” to exit voice command.
3
Uconnect姞 8.4 & 8.4N 89

Uconnect 4.3 Specifications

General

Brand	Uconnect
Model	4.3
Category	Car Receiver
Language	English