Uconnect 5.0 NAV User Manual

Auto On Radio
Press the “Auto On Radio” button to set how the radio
behaves when the Ignition is switched to ON. The options
are: Radio On, Radio Off or Reset to the last turned to stop
condition. Press the “Done” button when complete.
Radio Off Delay
Press the “Radio Off Delay” to keep the radio On for a
preset amount of time after the Ignition is switched OFF.
Press the “Done” button when complete.
Clock Setting
1. To start the clock setting procedure, perform either of
the following:
• Push the MORE button on the right side of the
display, press the “Time” button and then press the
“Set” button.
• Push the MORE button on the right side of the
display, press the “Settings” button, then “Clock and
Date” button, and then the “Set Time and Date”
button. Select the “Up or Down” arrows as appro-
priate. Select “Done” when complete.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
2. Press the “Up” or “Down” arrows to adjust the hours
or minutes, next select the “AM” or “PM” button. You
can also select 12hr or 24hr format by pressing the
desired button.
3. Once the time is set press the “Done” button to exit the
time screen.
3
RADIO MODE 25

Uconnect 5.0 NAV Specifications

General

Brand	Uconnect
Model	5.0 NAV
Category	Car Receiver
Language	English