Uconnect 5.0 NAV User Manual

Data Transfer
The trip data is saved in the system’s memory. By
correctly configuring a USB drive and going to the
eco:Drive site, the history of trips can be achieved in a
personal profile and the overall analysis of the trip data
and driving style can be consulted.
Do not remove the USB stick until the system has
downloaded the data since they might be lost completely
or partially.
During the transfer of data to the USB drive, messages
may appear on the display to guide the user correctly
through the operation.
These messages are only displayed with the ignition key
in the OFF position and system off delay longer than
0 minutes.
NOTE:
• Warning messages will be displayed when the USB
storage device is full.
• When the eco:Drive data is not transferred to USB
storage device for a long time, the internal memory of
the Uconnect® system may be exhausted.
• Warning messages will also be displayed in case of
eco:Drive internal memory full: To not lose saved data,
it will be required to connect the USB storage device
configures for eco:Drive.
50 MORE MAIN MENU

Uconnect 5.0 NAV Specifications

General

Brand	Uconnect
Model	5.0 NAV
Category	Car Receiver
Language	English