SMS Message Reader
The system can read the messages received by the mobile
phone.
To use this function the mobile phone must be support
the SMS exchange function via Bluetooth®
If this function is not supported by the phone, the
corresponding
button is deactivated (greyed out).
When a text message is received, the display will show a
screen where the options “Listen,” “Call” or “Ignore” can
be selected.
Press the
button to access the list of SMS messages
received by the mobile phone (the list displays a
maximum of 60 messages received).
SMS Message Reader Activation/Deactivation
The SMS message automatic reading function can be
activated/deactivated by pressing the corresponding
button on the display, which is shown after pressing the
phone selection button.
NOTE: On some mobile phones, to make the SMS voice
reading function available, the SMS notification option
on the phone must be enabled: this option is usually
available on the phone, in the Bluetooth® connections
menu for a device registered as Uconnect®. After en-
abling this function on the mobile phone, it must be
disconnected and reconnected with the system to make it
effective.
40 Uconnect® PHONE
To Next Page
Loading...
Need help?
General
