Before proceeding, the Bluetootht device needs to be
paired through Uconnect™ Phone in order to communi-
cate with the Uconnect™ Access System.
NOTE: See the pairing procedure in the Uconnect™
Phone section for more details.
To access Bluetootht mode, touch the Bluetootht soft-key
on the left side of the display.
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection on the Bluetootht device. Touch and release the
left arrow soft-key to return to the beginning of the
current selection, or return to the beginning of the
previous selection if the Bluetootht device is within the
first second of the current selection.
Source
Touch the Source soft-key to select the desired audio
source, Disc, USB/iPodt, SD Card, AUX or Bluetootht .
This screen will time out after a few seconds and return
to the main radio screen if no selection is made.
Tracks
Touch the trks soft-key to display a pop up with the Song
List. The currently playing song is indicated by a blue
arrow and lines above and below the song title.
Touching the trks soft-key while the pop up is displayed
will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
178 Uconnect™ ACCESS USER’S MANUAL
To Next Page
Loading...
Need help?
General
