NOTE: The call will remain within the vehicle audio
system until the phone becomes out of range for the
Bluetootht connection. It is recommended to press the
“transfer” soft-key when leaving the vehicle.
Advanced Phone Connectivity
Transfer Call To And From Mobile Phone
The Uconnect™ Phone allows ongoing calls to be trans-
ferred from your mobile phone to the Uconnect™ Phone
without terminating the call. To transfer an ongoing call
from your paired mobile phone to the Uconnect™ Phone
or vice versa, press the Transfer button on the Phone
main screen.
Connect Or Disconnect Link Between The Uconnect™
Phone And Mobile Phone
If you would like to connect or disconnect the Bluetootht
connection between a Uconnect™ Phone paired mobile
phone and the Uconnect™ Phone, follow the instructions
described in your mobile phone User’s Manual.
Things You Should Know About Your Uconnect™
Phone
Voice Command
• For best performance, adjust the rearview mirror to
provide at least ½ in (1 cm) gap between the overhead
console (if equipped) and the mirror.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
• Make sure that no one other than you is speaking
during a voice command period.
• Performance is maximized under:
• low-to-medium blower setting,
1
Uconnect™ ACCESS USER’S MANUAL 195
To Next Page
Loading...
Need help?
General
