EasyManua.ls Logo

UCTECH FT0365 - Set (Program) Mode

Default Icon
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 32 -
To clear the total rain, press the CHANNEL/+ or MAX/MIN/-
button until total rain is displayed. The total rain will flash.
Press and hold the SET button for five seconds until total rain
reads 0.0.
3. Absolute Pressure and Relative Pressure. Press the
CHANNEL/+ or MAX/MIN/- key to toggle between absolute
pressure and relative pressure.
4. Outdoor Temperature. Press the CHANNEL/+ or
MAX/MIN/- key to toggle between outdoor temp, dew point,
and feels like.
7.2 Set (Program) Mode
While in Normal Mode, press and hold the SET key for at
least three seconds to enter the Set Mode. The first setting will
begin flashing. You can press the SET key again to skip any
step, as defined below.
Note: In the Set mode, press the CHANNEL/+ key or
MAX/MIN/- key to change or scroll the setting value. Hold the
CHANNEL/+ key or MAX/MIN/- key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE
button of the display console.
1. 12/24 Hour Format (default: 12h). Press the SET key
again to adjust the 12/24 hour format setting. Press the
CHANNEL/+ key or MAX/MIN/- key to change between 12
hour and 24 hour format.