EasyManua.ls Logo

UCTECH FT0365 - Sensor Search Mode; Max;Min Viewing and Reset Mode

Default Icon
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 35 -
MAX/MIN/- key to switch between SYNC time ON/OFF of
measure. Synchronize the time of the device with WiFi.
17. Location Division. (default: Northern Hemisphere).
Press the SET key again to change the location division. Press
the CHANNEL/+ key or MAX/MIN/- key to toggle the position
of the earth Northern Hemisphere (NOR) or Southern
Hemisphere (NOR). (Refer to 5.0 Final Installation of Sensors)
7.3 Sensor Search Mode
If Integrated Outdoor Transmitter data is lost, touch and hold
the CHANNEL/+ button for 3 seconds, the search icon will be
displayed constantly for 3 minutes. Once the signal is
reacquired, the remote search icon will turn off, and the
current values will be displayed.
7.4 Max/Min Viewing and Reset Mode
7.4.1 Max Record Viewing and Reset
In normal mode, press (do not hold) the MAX/MIN/- key, the
MAX icon will be displayed in date area.
Press the SET key to view max values of rainfall (1h, 24h,
week or month), wind gust and average, UV and sunlight,
pressure (ABS or REL), outdoor temperature and humidity
(feels like or dew point) and indoor temperature and humidity
.
Press the MAX/MIN/- key for three seconds to clear all Max
values.(Rainfall, wind speed, wind gust, pressure, UV and
Sunlight, temperature and humidity maximum values).