UCTECH FT0365 - Trouble Shooting Guide

- 62 -
12. Trouble Shooting Guide
Problem
Solution
Wireless remote not reporting
in to console.
There are dashes (--.-) on the
display console.
If any of the sensor
communication is lost, dashes
(--.-) will be displayed on the
screen. To reacquire the
signal, press and hold the
CHANNEL/+ button for 3
seconds, choose the lost
sensor and the remote search
icon will be constantly
displayed. Once the signal is
reacquired, the remote search
icon will turn off, and the
current values will be
displayed.
The maximum line of sight
communication range is
100m(330ft) and 30m(100ft)
under most conditions. Move
the sensor assembly closer to
the display console.
If the sensor assembly is too
close (less than 1.5m/5ft),
move the sensor assembly
away from the display