Uctronics Ultimate Starter Kit for Arduino User Manual

43
Result
When someone stands within the sensing range of the module, the LED will light up and delay
for a while. When the person exits the sensing range, the LED will turn off after some time
delay. In addition, the delay time and detection distance can be adjusted by the resistors on
PIR module.

Uctronics Ultimate Starter Kit for Arduino Specifications

General

Microcontroller	ATmega328P
Operating Voltage	5V
Input Voltage (recommended)	7-12V
Input Voltage (limit)	6-20V
PWM Digital I/O Pins	6
Analog Input Pins	6
DC Current per I/O Pin	20 mA
DC Current for 3.3V Pin	50 mA
SRAM	2 KB
EEPROM	1 KB
Clock Speed	16 MHz
LED_BUILTIN	13
Compatible with	Arduino IDE
Instruction Manual	Included
Digital I/O Pins	14
Flash Memory	32 KB
Product Type	Starter Kit

Summary

Getting Started with Arduino

Prerequisite: Install Arduino IDE

Step-by-step guide to installing the Arduino IDE software for programming the board.

Adding Libraries and Serial Monitor

Instructions for incorporating external code libraries and using the Serial Monitor for communication.

Compiling and Uploading Programs

Process of verifying code and transferring it to the Arduino board via the IDE.

Arduino Project Modules

Lesson 1: Blink and Breathing LED

Control onboard and external LEDs for blinking and breathing effects using PWM.

Lesson 3: Digital Inputs-Switches

Lesson 5: Active Buzzer

Lesson 8: 7-segment display

Lesson 10: Relay

Lesson 12: Servo Motor

Lesson 15: Intrusion Detection by PIR

Lesson 16: 1602 LCD Display

Lesson 18: Temperature & Humidity Sensor DHT-11

Lesson 20: Ultrasonic Sensor Module

Lesson 23: 4x4 Matrix Keyboard

Lesson 24: Real Time Clock Module

Lesson 27: MAX7219 LED Dot Matrix Module

Lesson 29: MPU-6050 Module

Lesson 32: ESP8266 WiFi Module

Build a WiFi remote control system using ESP8266 and an Android app.

Lesson 33: Building a Smart Home System

Create a smart home system with ESP8266, sensors, and Arduino.