63
Result
Open the serial monitor. Insert the water lever detection sensor module into water, you will see
that the data displayed in the serial monitor, which represent the depth of the module immersed
in water. (Unit: 1/10 mm)
Note: Don't immerse the module in water too deep to avoid short circuits.
COM11(Arduino/Genuino Mega or Mega 2560)
Send
AD C0 level is 124
AD C0 level is 108
AD C0 level is 89
AD C0 level is 72
AD C0 level is 52
AD C0 level is 40
AD C0 level is 29
AD C0 level is 40
AD C0 level is 28
AD C0 level is 40
AD C0 level is 29
AD C0 level is 18
AD C0 level is 30
AD C0 level is 14
AD C0 level is 25
AD C0 level is 14
To Next Page
Loading...
Need help?
General