70
Result
Open the serial monitor. The value of the acceleration and angular velocity of the X-axis, Y-
axis and Z- axis as well as the real-time temperature will be displayed. Turning the MPU6050
module, the values will be changed accordingly.
CO M11(Arduino/Genuino Mega or Mega 2560)
Send
AcX = -7456 I AcY = 12012 I AcZ = 5976 I Tmp = 34.84 I GyX = -3595 I GyX = 965 I GyZ = -2780
AcX = -7976 I AcY = 11856 I AcZ = 7996 I Tmp = 34.69 I GyX = -1083 I GyX = 418 I GyZ = -324
AcX = -7576 I AcY = 11836 I AcZ = 7908 I Tmp = 34.84 I GyX = -794 I GyX = 329 I GyZ = -128
AcX = -7944 I AcY = 11520 I AcZ = 7716 I Tmp = 34.84 I GyX = -81 I GyX = 249 I GyZ = -192
AcX = -5824 I AcY = 12648 I AcZ = 8920 I Tmp = 34.79 I GyX = 535 I GyX = 2990 I GyZ = -3459
AcX = -7388 I AcY = 12256 I AcZ = 7696 I Tmp = 34.84 I GyX = 0 I GyX = -56 I GyZ = -664
AcX = -7880 I AcY = 11656 I AcZ = 7700 I Tmp = 34.84 I GyX = 2145 I GyX = -94 I GyZ =476
AcX = -6704 I AcY = 12376 I AcZ = 7160 I Tmp = 34.84 I GyX = -3988 I GyX = 304 I GyZ = -589
AcX = -7736 I AcY = 11956 I AcZ = 7672 I Tmp = 34.84 I GyX = 557 I GyX = -5 I GyZ = -706
AcX = -8008 I AcY = 11616 I AcZ = 8032 I Tmp = 34.84 I GyX = -279 I GyX = 309 I GyZ = -268
AcX = -7656 I AcY = 11736 I AcZ = 7700 I Tmp = 34.84 I GyX = 399 I GyX = -181 I GyZ = 179
AcX = -7696 I AcY = 11992 I AcZ = 7708 I Tmp = 34.84 I GyX = 1339 I GyX = 14 I GyZ =292
To Next Page
Loading...
Need help?
General