To Next PageTo Next Page
Need help?Do you have a question about the UeeVii CPE450 and is the answer not in the manual?
Details the included package items and explains the function of various LED indicators on the device.
Lists primary functions like long-distance transmission, multiple modes, and power saving features.
Provides model, hardware, network standards, transmission rate, frequency, power, and operating temperature.
Illustrates the connection for the transmitting side, showing CPE, PoE adapter, and PC.
Illustrates the connection for the receiving side, linking IP camera and CPE via PoE adapter.
Explains how to pair wireless bridges using dialing and setting modes (A/B) for initial connection.
Details setting A/B modes and interpreting connection status via digital display and LEDs.
Provides a detailed chart explaining the status indicated by WLAN, LAN, PWR, LED display, and Point Light.
A chart mapping LED numbers (0-f) to specific A IP, B IP, 2.4G ID, and 5.8G ID addresses.
Guides through powering the CPE with a PoE adapter and connecting network cables for PC access.
Details finding CPE number, modifying PC IP to match network segment for access.
Steps to access the bridge via browser, enter IP address, and log in with default credentials.
Visual guide on changing adapter options and configuring IPv4 settings for PC access.
Diagram illustrating the connection setup for computer-based bridge configuration via WEB UI.
Instructions on assigning different IP addresses to CPEs for easy management within the same network.
Steps to select 'A(Master)' mode and matching ID for the wireless receiver (receiving point).
Steps to select 'B(Slave)' mode and matching ID for the wireless transmitter (transmission point).
Diagram showing a point-to-point connection for IP cameras and video recorders.
Diagrams illustrating point-to-multi-point and multiple clients connections for cameras and recorders.
Illustrates two network diagrams for wireless surveillance setup in elevator wells.
Provides advice on installation, support, and explains speed limitations of the wireless bridge.
General| Model | CPE450 |
|---|---|
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Bands | 2.4GHz |
| Ethernet Ports | 1 x 10/100Mbps |
| Power Supply | DC 12V/1A |
| Wi-Fi Speed | 300Mbps |
| Interface | Ethernet, Wi-Fi |
| Antenna Gain | 5dBi |
| Max Transmission Power | 20dBm |
| Operating Mode | AP, Client |
| Operating Humidity | 5% to 95% (non-condensing) |
| Max Data Rate | LTE Cat4: DL 150Mbps, UL 50Mbps |
