E. Pressure
When you press the pen on the tablet work area, the tablet should detect the pressure
from the pen and transfer the pressure value to the computer programme
1. Pressure Sensitivity Test
Use the pen to draw on within the Pressure Test Area; apply different pressure on the
pen onto the tablet, the pressure should be reflected by the line thickness
2. Clear Button
Press the “Clear” button would clear what you drew on the Pressure Test Area
3. Colour Test
You can also pick colour of the lines you draw on the test area
4. Pressure Value
The more pressure you apply, the greater the value
5. Sensitivity
Heavier sensitivity requires the greater amount of pressure to be applied from the pen to
the tablet for the pressure to be detected
To Next Page
Loading...
