Ultenic D7 - Using Your Robot; Remote Control Functions and Range; Setting Up the Auto Empty Base

󾙗
Note:
󾙓
󾙔󾙕󾙘󾙓󾙒󾙔󾙒
Less than or equal to 3-6 meters
Using Your Robot
󾙓
About your Auto Empty Base
The Auto Empty Base is designed to automatically empty and charge the Ultenic robot vacuum
cleaner D7. Plug the power cable into the back panel of the Base and plug the other end in a
functioning wall outlet. Place on a flat, hard surface at least 2.5 inches away from the wall.
Ensure that there is a clear space in front and both sides so that your D7 can return to Base to
recharge and empty.
Back to Home