Maintenance and Care
Your Robot is designed to be used regularly. As with most floor care devices, regular use may cause
build-up around brushes, in debris compartments and near filters. We recommend performing
regular maintenance, as outlined in the following pages, to keep your Robot running at optimal
performance.
PART
Rolling brush
Side brush
Filters
Sensors
Charging contacts
Omnidirectional wheel
CARE FREQUENCY REPLACEMENT FREQUENCY
Once per week
⸺
⸺
⸺
Every 3-6 months
Every 2 months
Every 6-12 months
Once per week
Once per week
Once per month
Once per month
Once per month
Pinch the left and right tabs on the
rolling brush cover. Lift and remove the
cover.
Remove the rolling brush and clean
with included cleaning tool as seen in
the figure below.
Note:
Use a Philips screwdriver to unscrew
the side brush screw and remove the
side brush.
Remove dirt and debris and reinstall
with Philips screwdriver.
To Next Page
Loading...
