EasyManua.ls Logo

ULTIMATE SPEED UAWSB 2 C2 - Page 9

ULTIMATE SPEED UAWSB 2 C2
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB/IE/NI/CY/MT
9
come into contract with the sulphuric
acid, flush the affected body region
with plenty of clear, running water
and seek medical advice at once!
Avoid an electrical short circuit
when connecting the device to the
battery. Only connect the red quick
contact connector clamp
3
to the
positive terminal (“+”) of the battery.
Only connect the black quick
contact connector clamp
4
to the
negative terminal (“-”) of the battery.
Only touch the quick contact
connector clamps
3
and
4
on the
insulated area!
ATTENTION: AVOID
MATERIAL DAMAGE FROM
IMPROPER USE!
Only use the device with the origi-
nal parts it was delivered with!
Keep the contact surfaces of the
battery free of dust and lubricants.
Clean the contact surfaces with a
clean, dry cloth as necessary.

Table of Contents