Ultra Start 1250 SERIES User Manual

-The system must be placed into Service Mode before any service work is started on the vehicle. It is
the sole responsibility of the vehicle owner to ensure that this is done. The manufacturer accepts no
liability or responsibility for accidental starting of the vehicle.
- CARBON MONOXIDE - Never Start in an Enclosed Building (Garage, Carport etc...)
- The Hood Pin Safety Switch Must Always be Installed!
- Never Install Automatic Transmission Remote Starters into a Manual Transmission Vehicle!
U.S.A. Model
This Manual Covers All 1250 Series
Remote Starters
Manual
Transmission

Ultra Start 1250 SERIES Specifications

General

System Type	Remote Starter
Number of Buttons	4
Remote Start	Yes
Keyless Entry	Yes
Security System	No
Battery Life	Up to 1 year
Compatibility	Most vehicles

Summary

Remote Starter Functions

Remote Starting

Instructions on how to remotely start the vehicle and confirm operation.

Extended Run Time

Remote Stop

Procedure to shut down the vehicle that was started remotely.

Reservation Mode for Manual Transmissions

Auto Reservation Mode

Automatic procedure to prepare manual transmission vehicles for remote start.

Manual Reservation Mode

Dealer-programmable manual procedure for manual transmission vehicles.

Cold Start and Timer Mode

Method 1 for Entering Mode

Method 2 for Entering Mode

Cancelling Cold Start/Timer Mode

System Service Mode (Valet Mode)

Entering Service Mode

Steps to place the system into Service Mode for maintenance.

Exiting Service Mode

Steps to disable Service Mode and re-enable remote start.

Diagnostics

Diagnostics Chart

Interpreting park light flashes and status LEDs for diagnostic codes.

Diagnostic Memory

Accessing and clearing stored shutdown codes for troubleshooting.