To Next PageTo Next Page
Need help?Do you have a question about the Ultra Start 4500 and is the answer not in the manual?
General| Brand | Ultra Start |
|---|---|
| Model | 4500 |
| Category | Remote Starter |
| Language | English |
Instructions for locking doors and arming the vehicle alarm using the remote transmitter.
Instructions for unlocking doors and disarming the vehicle alarm using the remote transmitter.
Procedure to activate the trunk release function via the remote transmitter.
How to activate Car Finder mode and the optional 5th channel output.
Steps to activate and disable the panic alarm function using the remote.
Procedure for starting the vehicle remotely using the transmitter.
Steps to prepare a manual transmission vehicle for remote start.
How to extend the programmed runtime of the remote starter.
Instructions for shutting down the remotely started vehicle.
How to activate idle mode to keep the engine running after ignition is turned off.
Procedure for activating the optional 4th channel output.
How to check the status of the alarm system or remote starter via the remote.
Indicates the remote's transmitting range to the vehicle.
Appears when the vehicle starts in Timer or Cold Temperature Mode.
Indicates the status of the remote starter, flashing when disabled, solid when started.
Indicates the alarm has been triggered and the siren is active.
Displayed when the trunk release output is activated.
Shows the current battery level of the remote transmitter.
Bar graph indicating remaining runtime during remote start.
Allows users to program system features via the remote transmitter.
Confirms Timer or Cold Temperature Mode is programmed ON.
Indicates remote starter status; ON means starter is disabled.
Indicates which vehicle the remote is operating in Dual Car mode.
Indicates if the siren chirp feature is enabled or disabled.
Shows if the shock sensor is active or deactivated.
Indicates if the system is in Service Mode (Valet Mode).
Displayed until user program mode is accessed.
Overview of button functions for remote transmitter operations.
How to select start intervals or temperature settings for the timer mode.
How to quickly select the last programmed start interval or temperature.
Interpreting park light flashes and status LED codes for diagnostics.
How to activate and deactivate System Service Mode using the remote.
How to enter and exit Emergency Service Mode using the antenna program button.
Instructions for replacing the battery in the remote transmitter.
Explanation of the Key Icon flashing and reasons for remote start disabling.
Procedure for setting the sensitivity of the shock sensor.
Details of the 3-year limited warranty and exclusions.
