To Next PageTo Next Page
Need help?Do you have a question about the Ultra Start 32 SERIES and is the answer not in the manual?
General| Number of Buttons on Remote | 4 |
|---|---|
| Engine Start | Yes |
| Keyless Entry | Yes |
| Confirmation | Audible and visual |
| Remote Start Runtime | 12 minutes |
| Compatibility | Gas and Diesel vehicles |
| Battery Life | 1 year |
| Installation | Professional installation |
Details the company's objective to design and manufacture advanced remote car starters and security systems.
Lists the key features and capabilities of the Ultra Start remote starter system.
Emphasizes the critical need for a carbon monoxide detector and safe operating practices.
Provides essential safety rules for remote starter use, including manual transmission and enclosed areas.
Explains the basic procedure for starting the vehicle remotely using the transmitter.
Details how to extend the vehicle's running time after it has been remotely started.
Describes the method to safely shut down the vehicle from the remote transmitter.
Covers the procedure for keeping the vehicle running after the ignition key is turned off.
Explains how to set the vehicle to run for a predetermined time after the ignition is turned off.
Outlines the default procedure for setting the vehicle in Reservation Mode automatically.
Details the optional procedure for manually setting the vehicle in Reservation Mode.
Details how to lock, unlock, and perform silent lock/unlock operations with the remote.
Explains the optional feature to keep doors locked and potentially roll up windows or close sunroof.
Describes the procedure to open the vehicle's trunk using the remote transmitter.
Explains how to use the remote to locate the vehicle in a parking lot.
Details how to activate the panic alarm and siren for personal protection.
Provides step-by-step instructions for activating the Timer Mode for scheduled starts.
Explains the methods to cancel or disable the Timer Mode functionality.
Guides the user through the process of learning and programming remote transmitters to the system.
Details the steps to enable Service Mode, disabling remote start for maintenance.
Explains how to disable Service Mode and re-enable remote start functions.
Explains how to check the system status using the remote transmitter's display.
Provides an overview of key status icons like Antenna, Key, Battery, and Timer.
Details icons related to remote start runtime countdown and vehicle status like Lock/Unlock.
Covers programmable icons and the Service Mode indicator on the remote display.
Guides the user through the process of setting the current time on the remote transmitter.
Lists park light flashes and corresponding diagnostic codes for system shutdowns.
