Ultratec CapTel 2400iBT Setup Guide

Customer Service: 888-269-7477 SETTING UP 11
Step 5: Network Connection
For Wired Connections:
1. Plug the Ethernet cable that came with your phone into the jack on the
back of the CapTel phone labeled “Ethernet”.
2. Plug the other end of the Ethernet cable into the jack you use to access
your Internet service. Depending on how your Internet service is set up,
you could be plugging into an available Ethernet jack on any of the
following:
• On a digital cable modem
• On a DSL modem
• On a router in your home
• In an Ethernet wall outlet
Use the examples on the following page to match your setting with the
correct installation method.
Initial Setup
setup network
plug in ethernet cable
or press button below for wi
language
telephone line
network connection
time and date
software
terms and conditions
language
telephone line
Use WiFi Network

Ultratec CapTel 2400iBT Specifications

General

Brand	Ultratec
Model	CapTel 2400iBT
Category	Telephone
Language	English