Ulvac DAU-20 - Dimensional Drawing; Installation and Storage; Cautions for Installation and Storage; Environmental Conditions for Installation, Storage, and Operation

3
2. Dimensional Drawing
3. Installation and Storage
3.1 Cautions for Installation and Storage
See Warning
(1)(2)(3)(5)(6)(7)(8)(9)(10)(11)(12)(13)(15), P04
See Caution (1)(2)(3), P05
See Note (1)(2)(3)(4)(8), P06
3.2 Environmental Conditions for Installation, Storage, and Operation
The fine clearances used in this pump require that the following conditions be satisfied during
storage, installation, and operation.
1. Ambient temperature of 5~40°C and maximum relative humidity of 85% during operation.
2. Equal to or less than meters above the sea level 1000m storage and operation.
3. Other conditions for storage and operation.
a) Level floor of sufficient strength.
b) No condensation
c) Dust-free environment
d) Well ventilated
e) Environment free of corrosive or explosive gas.
※・When motor specifications are 115V, 200V, 220V and 230V, cable termination is "loose end".
Warning
Caution
Note
Power Cable
Length over the body
frame: Approx. 1.8m
Fig.1 DAU-20 Dimensions