Ulvac G-100D - Fig. 7 Change Region of the Voltage and Frequency

-12-
Fig. 7 Change region of the voltage and frequency
Before connecting wires, turn off the power switch. Never perform wiring with
the power supplied as an electric shock will occur. Connect the earth wire
correctly. Failure to do so may result in electric shock if a failure or earth
leakage occurs. Installation of a dedicated earth leakage breaker is also
recommended.
Perform electric wiring correctly in accordance with the “Electric Equipment
Technical Standard” and “Internal Wiring Regulation.” Incorrect wiring
will result in fire.
Install an overload protector suitable for the capacity of the motor. If an
overload protector is not installed, or if an overload protector that is
unsuitable for the motor capacity is installed, the motor will be damaged
leading to fire.
Caution
Warning
Caution