Ulvac PKS-030 - Inspection

-4-
1.Inspection
When unpacking, check the following items,
1) Is the pump received of the exact model you have ordered?
2) Are the complete accessories present?
2-1) In case you have ordered a motor-less pump, the following items should
be present in the pack:
2-2) In case you have ordered a pump, with motor, the following items should
be present in the pack:
2-1): Motor-less Pump 2-2): Pump with Motor
1. Pump 1. Pump
2. Pump-base 2. Pump-base
(Type: PKS-016 only) (Type PKS-016 only)
3. V-belts 3. V-belts
4. Belt-cover 4. Belt-cover
5. Pulley-cover 5. Pulley-cover
6. Motor-Pulley 6. Motor-Pulley
7. Anchor-bolts 7. Anchor-bolts
8. Pump oil 8. Motor
9. Pump oil
3) Visually inspect if there is any damage to the pump and the parts caused by
transportation.
4) Check for any looseness of screws or nuts, or for any disconnection of parts.
Note:
  Should you have noticed any trouble or damage with the pump or its
accessories,pleaseimmediatelynotifyourdistributororcontactULVAC's
InternationalDepartmentdirectly.