Need help?Do you have a question about the um DSR SM 125 and is the answer not in the manual?
General| Displacement | 124.6 cc |
|---|---|
| Fuel System | Carburetor |
| Ignition | CDI |
| Lubrication | Wet Sump |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
| Bore x Stroke | 56.5 mm x 49.5 mm |
| Starting System | Electric & Kick Start |
| Transmission | 5-Speed |
Outlines maintenance tasks categorized by frequency (before start-up, after wash, yearly).
Procedures for adjusting throttle cable, inspecting spark plugs, and checking compression.
Steps for removing camshaft, timing chain, tensioner, and related parts.
Procedures for dismantling cylinder head, piston, and flywheel magneto.
Steps for dismantling the clutch assembly and the oil pump.
Procedures for dismantling crankshaft, crankcases, and transmission components.
Inspecting cylinder head, valve seats, and adjusting valve clearance.
Steps for assembling transmission, gear selector, crankshaft, and related parts.
Procedures for assembling crankcases, oil pump, and clutch components.
Steps for assembling magneto, camshaft, timing chain, and related parts.
Procedures for installing piston rings and assembling cylinder head, cylinder, and piston.
To Next Page
