Need help?Do you have a question about the um UXPW125 and is the answer not in the manual?
Schedule of maintenance tasks for the engine based on travel distance.
Specifications and service limits for engine components like oil and spark plugs.
Specified torque values for various engine fasteners and components.
Procedure and specifications for spark plug inspection, cleaning, and replacement.
Step-by-step guide on how to inspect and adjust valve clearance for optimal engine performance.
Instructions for checking the engine oil level to ensure proper lubrication.
Detailed procedure for draining old oil and replacing the engine oil and filter.
Diagram illustrating the flow and components of the engine's lubrication system.
Technical data and service limits for lubrication system components.
Common issues, symptoms, and remedies for the lubrication system.
Procedures for dismantling, disassembling, checking, and installing the oil pump.
Illustrated breakdown of cylinder head components for identification and assembly.
Steps for removing, inspecting, and reinstalling the upper cylinder head cover.
Procedures for disassembling and assembling the rocker arm assembly.
Detailed instructions for disassembling, checking, and assembling the cylinder head.
Guide for removing and installing the engine's chain tensioner device.
Diagram showing the assembly of the cylinder block and piston components.
Specifications and allowable wear limits for cylinder and piston components.
Common problems, causes, and solutions related to the cylinder block and piston.
Procedures for disassembling, inspecting, and installing the cylinder block and piston.
Diagram showing the parts of the right cover, clutch, balancing gear, and gearshift.
Key specifications and service limits for the clutch assembly.
Required torque values for clutch-related fasteners.
Common clutch problems, symptoms, and corrective actions.
Procedures for removing and installing the engine's right cover assembly.
Detailed steps for extracting and installing the clutch assembly.
Procedures for removing and installing the gearshift arm components.
Steps for extracting and installing drive and balancing gears.
Diagram showing components of the left cover, starting motor, and magneto.
Procedures for removing and installing the engine's left cover.
Steps for extracting and installing the starting motor system.
Procedures for removing and installing the magneto stator.
Diagram illustrating the assembly of the crankcase components.
Specifications and service limits for crankcase and drivetrain parts.
Step-by-step guide for removing the crankshaft from the crankcase.
Procedures for removing and checking the drive train components.
Methods for safely removing bearings from the crankcase.
Procedures for installing bearings and oil seals correctly into the crankcase.
Steps for cleaning, lubricating, and assembling the drive train components.
Instructions for inspecting the crankshaft for wear and runout.
Procedures for cleaning, applying sealant, and assembling the crankcase halves.
Overview of the EFI system components and diagnostic capabilities.
Instructions for installing the diagnostic app and connecting to the motorcycle.
List of standard OBD II fault codes and their meanings.
To Next Page
General
