3.
4.
Important! Unlock your scanner first
Look at the rear of the scanner. You should see a switch that has an unlock and lock symbol. Your scanner
is locked to prevent damage during shipment so the optics must be freed before scanning. Flip the switch
from the Locked position to the Unlocked position. See the illustration below.
Connect the Power
Plug in the Power Adapter power cord and follow the installation instructions below:
Simply insert the round end of the power cable into the back of the scanner and plug the other end of the
cable into an available electrical outlet. See the illustration below.
5
To Next Page
Loading...
Need help?
General
