Ungo ProSecurity K20 - Page 13

Ungo ProSecurity
134
SR7000: 2-Way Security/Remote Start/Keyless Entry
Replacement 4-Button Remote Transmitter: SAA474U
Replacement Battery: CR2032
Replacement LCD Remote Transmitter: SAA477U
Replacement Battery: AAA
Ch. Number Function Wire Color
1 Auto-Learn Standard Configuration
2 Delete Remotes: This feature will erase all remotes from the
memory of the system.
NOTE: Does not reset the programmed features of the
system or reset the Intelli-Tach setting.
3 Reset Features: This resets all the features of the system
to the factory default settings.
NOTE: Does not delete the remotes from the system or
reset the Intelli-Tach setting.
4 Intelli-Tach Reset
: Deletes all previously learned values for
Intelli-Tach, and on the next remote start sequence the unit
will begin Intelli-Tach initialization.
NOTE: The "ZAP" feature on the ProSecurity Programmer
does not reset the Intelli-Tach setting.
SR9000: 2-Way Security/Remote Start/Keyless Entry
Replacement LCD Remote Transmitter: SAA7701U
Replacement Battery: AAA
Ch. Number Function Wire Color
1 Auto-Learn Standard Configuration
2 Arm Only
3 Disarm Only
4 Silent Mode/Remote Override/Trunk Release Red/White
5 Remote Start
6 Channel 4 Violet/Black
7 Channel 5 White/Black
8 Channel 6
9 Turbo Timer / Short Run
10 Timer Mode
11 Arm/Disarm/Panic
12 Panic Only
13 Rear Defogger
14 Delete All Transmitters