Ungo ProSecurity K20 - Wiring Quick Reference

Ungo ProSecurity
Wiring Quick Reference
150
K20: Keyless Entry System
Main Harness
Wire Color Function
Violet Unlock #87 Normally Open Input
Red/White (-) Output for Channel 2
Black/Blue Unlock #30 Common Output
Brown/Black Unlock #87A Normally Closed
Violet/Black Lock #87 Normally Open Input
Orange (-) 500mA Ground-When-Armed Output
White/Black Lock #87 Normally Closed
Yellow (+) Switched Ignition Input
Green/Black Lock #30 Common Output
White/Blue (-) Output for Channel 3
Black/White Output for Domelight Supervision Relay #30
Lt
. Green/Black (-) Factory Disarm Output
Black/White Input for Domelight Supervision Relay #87
Brown (-) Horn Honk Output
Blue (-) 200mA 2nd Unlock Output
Black (-) Chassis Ground
Red (+) 12v Constant
White (+/-) Parking Light Flash Output
Ports
White Status LED
Blue Valet/Override Switch
K10: Keyless Entry System
Main Harness
Wire Color Function
Orange Ground When Armed (-) 500mA
White (-) Parking Light Output
White/Blue (-) 200mA Channel 3 Validity Output
Black/White (-) 200mA Domelight Supervision Output
Green Not Used
Blue (-) Second Unlock Output
Violet Not Used
Black (-) Chassis Ground
Yellow (+) Ignition Input
Brown (-) Horn Output
Red (+) Constant Power
Red/White (-) 200mA Channel 2 Auxiliary Output
3-Pin 2-Wire Door Lock Harness
Wire Color Function
Green (-) Lock, (+) Unlock Output
Empty
Blue (-) Unlock, (+) Lock Output