EasyManuals Logo

UNI-T UDP6900 Series User Manual

UNI-T UDP6900 Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
User’s Manual UDP6900 Series Digital Control Power Supply
Instruments.uni-trend.com 4 / 44
following safety precautions.
Instrument ground
Please use the cable provided by the factory to connect device. To avoid electric
shock, the ground cable must connect correctly.
Operating voltage
Please make sure the operating voltage not over the rated range of 10%, to avoid
damage to the instrument.
Input voltage
Please use AC 110V~220V 50/60Hz AC power supply, use national approved power
cord and make sure insulating layer is in good condition.
Inspecting test lead
wire
Inspecting the insulated layer of the test lead wire whether is damaged or the wire
bareness, or the test lead wire is breakover. If the test lead wire is damaged,
please replace it before use the instrument.
Fuse
Only allowed to use the specified fuse of the product.
Over voltage
protection
Please make sure the instrument is not over-voltage (such as the voltage caused
by thunder), to prevent operating personnel away from electric shock.
Do not open the
cover during
operating
Do not operate the instrument when open the instrument cover, and do not
change the internal circuit.
Do not contact live
part
When the instrument is operating, do not touch exposed connecting wire, not
used input port and the circuit during testing. Please caution to the electric shock
when testing the voltage is over DC 60V or AC 30V.
Do not operate in
flammable and
explosive
environment
Do not use this device in a flammable and explosive or dusty, high temperature
and humidity and strong electromagnetic environment to avoid product damage
or personal injury.
Safety Sign
Ground
On (power)
Protective ground
Off (power)
Signal ground
Connect with Cabinet or Case
Danger mark
Environment-friendly Use Period
This environment-friendly use period (EFUP) mark indicates that dangerous or toxic
substances will not leak or cause damage within this indicated time period. The
environment-friendly use period of this product is 40 years, during which it can be used
safely. Upon expiration of this period, it should enter the recycling system.
WEEE Directive (2002/96/EC)
This additional label indicates that this electrical / electronic product must not be discarded
in household waste.

Other manuals for UNI-T UDP6900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UNI-T UDP6900 Series and is the answer not in the manual?

UNI-T UDP6900 Series Specifications

General IconGeneral
BrandUNI-T
ModelUDP6900 Series
CategoryPower Supply
LanguageEnglish

Related product manuals