4.4 Temperature Measurement (°C/°F Measurement, Picture 2)
1) Turn the range switch to the temperature measurement position;
2) Insert the plug of the K-type thermocouple into the meter, and fix the temperature sensing probe on the object to
be tested; read the temperature value on the display after it is steady.
Note:
“OL” symbol appears when the meter is turned on. Only K-type thermocouple/ temperature sensor is applicable (The
measured temperature should be less than 300 “C/572 ‘F). °F=°C*1.8+32
4.5 Non-contact AC Electric Field Sensing (Picture 3)
1. To sense whether there is AC voltage or electromagnetic field, please turn the range switch to the NCV
position;
2. Bring the front end of the meter close to the measured object to start sensing. The intensity of the electric field
sensing is indicated by the LED indicator and the segment “-” on the LCD. The more the segments (up to four
segments) are displayed, the higher the electric field intensity and the faster the beep.
4.6 Others
To Next Page
Loading...
Need help?
General
