UNI-T UT33D User Manual

l When continuity testing has been completed, disconnect the connection between
the testing leads and the circuit under test.
Measurement Operation (13)
F. Model UT33C: Temperature Measurement (see figure 6)
To avoid harms to you or damages to the
Meter, please do not attempt to input
voltages higher than 60V in DC or 30V in AC.
Warning
The Temperature measurement range is -40
o
C
~1000
o
C
or -40
o
F
~1832
o
F
. To measure
temperature, connect the Meter as follows:
1. Insert the red temperature probe into the
VΩmA
terminal and the black temperature
probe into the COM temperature.
( figure 6)
25
Model UT33B/C/D: OPERATING MANUAL

UNI-T UT33D Specifications

General

Diode test	Yes
Product type	Digital multimeter
AC voltage range	200 - 500 V
DC current range	0.02 - 10 A
DC voltage range	0.2 - 500 V
Basic accuracy (DC current)	±(1%+2)
Basic accuracy (DC voltage)	±(0.5%+2)
Basic accuracy (resistance)	±(0.8%+2)
Dimensions (WxDxH)	73.5 x 35 x 130 mm
Battery voltage	9 V

Weight and Dimensions

Weight	156 g