UNI-T UT60D - Page 14

The input value is too large for the
selected range.
: Ohm. The unit of resistance.
k : kilohm. 1 x 10
3
or 1000 ohms.
M : Megaohm. 1 x 10
6
or
1,000,000 ohms.
Hz : Hertz. The unit of frequency
in cycles/second.
kHz : Kilohertz. 1 x 10
3
or
1,000 hertz.
MHz: Megahertz. 1 x 10
6
or
1,000,000 hertz.
V : Volts. The unit of voltage.
mV : Millivolt. 1 x 10
-3
or 0.001
volts.
A : Amperes (amps). The unit
of current.
mA : Milliamp. 1 x 10
-3
or 0.001
amperes.
A : Microamp. 1x 10
-6
or
0.000001 amperes.
Revolution Measurement.
The unit: rev./min.
Sleep Mode feature is enabled. It
can be disabled by pressing
RANGE, Hz or RS232C when
turning on the Meter.
Indicates negative reading.
Analogue bar graph display.
Display Symbols (2) (see figure 2)
, k ,
M
Hz, kHz,
MHz
V, mV
A, mA,
A
RPM
----
9
10
11
12
13
14
15
16
17
Model UT60D: OPERATING MANUAL
14