UNI-T UT71C User Manual

42
Model UT71C/D/E: OPERATING MANUAL
Note
The requirement of Input amplitude “a” is as follows:
When 10Hz~40MHz: 200 mV a 30Vrms;
> 40MHz: Un-specified
When Hz measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove the test leads
away from the input terminals.
l
l

UNI-T UT71C Specifications

General

Brand	UNI-T
Model	UT71C
Category	Multimeter
Language	English