Need help?Do you have a question about the UNI-T UT804 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| Display Count | 6000 |
| Type | Digital |
| DC Current Range | 0.1µA to 10A |
| AC Current Range | 0.1µA to 10A |
| Frequency Range | 10Hz to 10MHz |
| Temperature Range | -40°C to 1000°C |
| Power Supply | 9V Battery |
Covers compliance with safety standards and definitions of CAT categories.
Provides essential guidelines and warnings for safe use of the meter.
Step-by-step guide for measuring DC voltage with the multimeter.
Procedure for measuring AC voltage, including True RMS display.
Instructions for accurately measuring low DC voltage levels.
Covers measurements for DC and AC currents across various ranges.
How to perform resistance measurements using the meter.
Procedure for checking electrical continuity with the meter.
Guide on using the meter to test diodes and semiconductor junctions.
Steps for measuring capacitance values with the multimeter.
How to measure signal frequency and duty cycle.
Procedure for measuring temperature using the meter and probe.
To Next Page
