UNI-T UT804 User Manual

26
Model UT804: OPERATING MANUAL
V
Note
Special care should be taken when measuring high
voltage.
When voltage measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove testing leads
away from the input terminals of the Meter.
When measuring , the Meter acts around a 10MΩ
input impedance in parallel with the circuit. This
loading effect can cause measurement errors in
high impedance circuits. In most cases, the error
l
l
l
high impedance circuits. In most cases, the error
is negligible (0.1% or less) if the circuit impedance
is 10kΩ or less.

UNI-T UT804 Specifications

General

Brand	UNI-T
Model	UT804
Category	Multimeter
Language	English