UNI-T UTD2000CEX+ Series - Page 21

UTD2000 Series User Manual
21
Figure 2-9 Vertical Channel Inverted Settings (Invert: ON)
2.6 Unit
Press Unit to set the unit as “V” or “A”, the default unit is V. After the unit is set, the unit on
channel status tag will change accordingly.
2.7 Mathematical operation function
Display results of CH1 & CH2 waveform mathematic operation (+、–、×、÷).
Figure 2-10 Math Operation
Table 2-3：Math Menu
Function Menu Setting Description
Type Math
Mathematic operation (+、–、×、÷)
Source1
CH1 You can select signal source1 as CH1
CH2 You can select signal source2 as CH2
Operator
+ Source1+Source2
– Source1–Source2
× Source1×Source2
÷ Source1÷Source2
Source2
CH1 You can select signal source1 as CH1
CH2 You can select signal source2 as CH2