Need help?Do you have a question about the UNI-T UTD2052CL and is the answer not in the manual?
General| Type | Digital Storage Oscilloscope |
|---|---|
| Bandwidth | 50 MHz |
| Channels | 2 |
| Memory Depth | 25 kpts |
| Weight | 2.2 kg |
| Rise Time | ≤7ns |
| Timebase Range | 5 ns/div to 50 s/div |
| Trigger Modes | Auto, Normal, Single |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Sample Rate | 500 MSa/s |
| Display | 5.7-inch TFT LCD |
| Input Voltage Range | 400 V (DC + AC peak) |
| Dimensions | 268mm x 150mm x 110mm |
| Trigger Type | Edge, Pulse, Video |
| Input Impedance | 1 MΩ ± 2%, 15 pF ± 3 pF |
Check instrument condition, fittings, and operational status upon receipt.
Adjust probe attenuation for accurate measurements and correct waveform display.
Configure channel coupling, bandwidth, probe, and phase settings.
Adjust horizontal time base, position, and view window extension.
Resolve common problems like no display, incorrect amplitude, or unstable waveforms.
To Next Page
