unicraft WPP 15 E - 14 Spare Parts; Spare Parts Orders

Spare parts
WPP 15 E | Version 1.02 15
(7) In the event of active, contractual infringements, delays,
non-performance, unauthorised actions or any other legal rea-
son (except infringements occurring prior to conclusion of the
contract) we shall be liable in case of intent or gross negli-
gence only. In the event of culpable damage to life, health or
injuries, in case of culpable infringements of major, contractual
obligations (main contractual obligations) or in the event of
malicious actions and claims for replacement as per Article
437, Section 2 of the German Civil Code (BGB), we shall be lia-
ble as per the statutory regulations, whereby our liability in the
event of an infringement of major, contractual obligations shall
be restricted to the typical, foreseeable damage. The term
"major, contractual obligations" shall either be used to specify
a specifically described, paramount infringement of obliga-
tions that put the objective of the contract at risk or, in abstract
terms, it shall be defined as an obligation as part of which its
compliance guarantees the correct implementation of the con-
tract on which customers can rely on a regular basis. In the
event of delays, customers shall be permitted to demand com-
pensation or alternatively withdraw from the contract.
(8) In the event of a loss of data we shall exclusively be liable if
our customers can verify that they have backed up the data
once a day (at minimum). The liability for data loss shall be
restricted to the recovery costs if there are backups, unless we
caused the data loss intentionally or as a result of gross negli-
gence. In any other case, except in the event of intent or gross
negligence, liability shall be excluded.
(9) The scope of our liability as per product liability legislation
shall remain unaffected.
14 Spare parts
14.1 Spare parts orders
Spare parts are available from authorised retailers or di-
rectly from the manufacturer. The contact details have
been listed in section 1.2 Customer service.
The following key data is required for queries or spare
parts orders:
- Machine type
- Item number
- Spare parts drawing number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air, ex-
press)
- Shipping address
Spare parts orders without the aforementioned data
cannot be taken into account. The supplier shall deter-
mine the shipping type if no relevant data was provided.
Data on the machine type, item number and year of
manufacture is listed on the type plate attached to the
workshop press.
Example
You are required to order the pressure gauge for the
WPP 15 E workshop press. The pressure gauge is de-
fined as number 38 in spare parts drawing 1.
- Machine type: WPP 15 E workshop press
- Item number: 630 0016
- Position number: 38
Order number: 0-630 0016-38
The order number is made up of the item number, spare
parts drawing number, position number and one digit of
the item number.
- The item number must feature a leading 0 (zero).
- Position numbers 1 to 9 shall also feature a leading
zero.
DANGER!
Risk of injury caused by the use of
incorrect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the man-
ufacturer or spare parts authorised by the manufac-
turer shall be used.
- Always contact the manufacturer if you are unsure.
Tips and recommendations
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.