To Next PageTo Next PageWhy won't my Uniden BC350C Scanner work?
There could be several reasons why your Uniden Scanner isn't working. Here are a few things to check: * Ensure the AC adapter is properly connected at both ends. * Make sure the wall outlet is active, and the power switch is turned on. * Verify the DC cord or cigarette lighter cord connections. * Check the fuse to see if it's blown. * If in a vehicle, ensure the ignition key is in the Accessory position.
Why won't my Uniden BC350C Scanner stop scanning?
If your Uniden Scanner won’t stop scanning, consider these possible solutions: * Check and adjust the squelch control. * Verify the antenna connection. * Ensure that not all channels are locked out. * None of the programmed frequencies might be active, so try the band search.
What to do if my Uniden Scanner has improper reception?
If your Uniden Scanner is experiencing improper reception, try the following: * Check the antenna and its connection to ensure it's secure. * Try moving the scanner to a different location. * If you're in a fringe area, you might need to use an optional multi-band antenna.
What to do if scan won’t start on Uniden BC350C Scanner?
If the scan won’t start on your Uniden Scanner, try the following: * Press the bank key again. * Adjust the Squelch Control. * For the PRIVATE bank scan.
Why search won’t start on Uniden BC350C?
If the search function won’t start on your Uniden Scanner, try these steps: * Adjust the Squelch Control. * Check the antenna connection.
How to fix Weather scan that won't work on Uniden BC350C Scanner?
If the weather scan is not working on your Uniden Scanner, here are some things to try: * Adjust the Squelch Control. * Check the Antenna Connection. * Make sure that not many of the channels are locked out. * Review each channel's frequency to ensure it's correctly stored in memory.
How to fix PROGRAM key that won’t work on Uniden BC350C Scanner?
If the PROGRAM key on your Uniden Scanner isn’t working, it might be because: * Scan or search must first be stopped. * Programming lock is ON.
Critical safety warnings about water exposure, electrical shock, and unit damage.
Legal and regulatory considerations for installation and modifications, advising community consultation.
Lists US patents associated with the product technology.
Introduces the BC350C scanner, highlighting its automatic scanning and service banks.
Explains how the scanner monitors active frequencies, stopping on transmissions.
Explains the scanner's ability to search for active frequencies within bands, including speed modes.
Explains trunked radio systems and why they may require specialized scanners.
Provides contact information for obtaining frequency guides and customer support.
Lists websites for additional scanner information and resources.
Lists all items included with the BC350C scanner package.
Lists optional accessories for enhancing scanner functionality.
Details the 7 service and private banks, including channel capacities.
Lists the 13 frequency bands available for searching.
Provides step-by-step instructions for setting up the scanner for home use.
Provides step-by-step instructions for installing the scanner in a vehicle.
Offers tips for improving scanner reception and placement during installation.
Details the procedure for connecting the scanner's antenna plug.
Details the procedure for connecting the power cord to the vehicle's electrical system.
Describes the operation of the HOLD, UP/DOWN, and PRIVATE keys on the front panel.
Explains the function of the POLICE, FIRE/EMS, and AIR/MRN bank selection keys.
Explains the function of WX, CB, SEARCH, L/O, and BAND keys for scanning and searching.
Details the PROG key, VOLUME control, and SQ (Squelch) control functions.
Describes the LCD display elements and illustrates various screen modes.
Details the ANT (Antenna) and EXT. SP. (External Speaker) connectors on the rear panel.
Covers the DC 13.8V Power Connector and the MEMO LOCK switch.
Explains three methods of scanning: Service Bank, Band Search, and Private Bank.
Provides initial setup steps for powering on and adjusting the scanner for the first time.
Step-by-step guide on how to adjust the squelch control for optimal scanning.
Instructions on how to start, stop, and resume the scanning process.
Explains how to step through channels manually or rapidly during scanning.
Details how to activate and use the Weather Channel Scan feature.
Explains how to lock out channels to prevent them from being scanned.
Notes limitations on channel lock-out for specific banks like WX and AIR.
Describes how to search for and display locked out channels.
Explains procedures for restoring individual or all locked out channels.
Provides instructions on how to initiate a band search for new frequencies.
Explains how to display the current frequency band range during search.
Details how to lock out specific frequencies to skip them during band search.
Procedure to unlock a single locked out frequency in search mode.
Procedure to unlock all frequencies that have been locked out within a bank.
General guidelines for programming frequencies into the scanner banks.
Notes restrictions on programming frequencies into AIR, MRN, CB, and WX banks.
Step-by-step guide to program a frequency found during scanning into a bank.
Step-by-step guide to program a frequency found during search into a bank.
Explains how to erase a programmed frequency by programming '000.0000' into the channel.
Explains how to use the MEMO LOCK switch to prevent accidental programming.
Provides advice on general usage, scanner location, and antenna positioning.
Provides instructions for cleaning the scanner and information on repairs.
Explains internal signals ('birdies') and lists known frequencies that may cause interference.
Solutions for common problems where the scanner does not power on or function.
Solutions for issues related to poor or improper radio reception.
Troubleshooting steps for when the weather scan feature is not working correctly.
Troubleshooting steps for when the scanner does not stop on active frequencies.
Troubleshooting for issues preventing scan or search modes from starting.
Troubleshooting steps for when the PROGRAM key is not functioning.
Provides specifications for the scanner's banks and frequency search bands.
Lists the receiver sensitivity specifications for various frequency ranges.
Details performance metrics such as scan rate, scan delay, and audio output.
Lists physical dimensions, weight, antenna impedance, and operating temperature.
Outlines the terms and conditions of the one-year limited warranty.
Specifies conditions that exclude or limit the warranty coverage.
Provides the procedure for contacting Uniden and obtaining warranty service.
General
