Why is my Uniden BC785D reception so bad?
If you are experiencing improper reception on your Uniden Scanner, try the following: First, check the antenna connection to ensure it is secure. Second, try moving the scanner to a different location. Finally, if you are in a remote area, you might need an optional multi-band antenna. Consult with your dealer or a local electronics store for antenna options.
Why is my Uniden BC785D not tracking EDACS properly?
If your Uniden scanner is not tracking an EDACS system properly, it could be due to these reasons: First, the logical channel numbers (frequencies) for the system might not be programmed in the correct order. Check frequency resources and reprogram. Second, not all frequencies for the system might be programmed. Check frequency resources.
What to do if Uniden BC785D Scanner scan won't start?
If your Uniden scanner won't start scanning, try these steps: First, press the SCAN key again. Second, adjust the SQUELCH control. Third, check to see if all channels are locked out.
Why does my Uniden BC785D sound scratchy or robotic?
If you're hearing scratchy or robotic sounds during communications on your Uniden scanner, move to a location where the signal strength is stronger.
How do I stop my Uniden BC785D from constantly scanning?
If your Uniden scanner won't stop scanning, try the following: First, adjust the squelch threshold. Second, check the antenna connection. Third, check to see if many of the channels are Locked Out. If so, the scanner has less chance of finding an active channel. Fourth, review each channel's frequency to see if it is still stored in Memory and is correct. Fifth, it's possible that none of the programmed frequencies are currently active.
What does 'APCO P25 CARD NOT INSTALLED' mean on my Uniden BC785D Scanner?
If the 'APCO P25 CARD NOT INSTALLED' message appears when you turn on your Uniden scanner, check to see if the P-25 card is properly installed.
Why can't I hear digital communication on my Uniden BC785D?
If you are not hearing digital communication on your Uniden scanner, first, verify the accuracy of the frequencies of the P-25 system you are trying to monitor. Second, you might be in a dead-spot for the P-25 system you are trying to monitor; check other locations in the area.
Why is Weather Scan not working on my Uniden Scanner?
If the Uniden weather scan is not working, try the following: First, adjust the squelch threshold. Second, check the antenna.
What to do if Uniden Scanner will not acquire data channel?
If your Uniden scanner will not acquire a data channel, first, adjust the squelch for Trunking mode. Second, you might be missing the frequency used for the data channel. Check your frequency list.
Why am I missing replies to conversations on my Uniden BC785D Scanner?
If you are missing replies to conversations on your Uniden scanner, first, change to a Type 1 scanner setup. Second, try another Preset Fleet Map or Program your own Fleet Map. Third, check to see that all of the systems frequencies have been entered.
General| Type | Base/Mobile Scanner |
|---|---|
| Channel Capacity | 1000 Channels |
| Channels | 1000 |
| Display Type | LCD |
| Power Supply | 13.8 VDC |
| Priority Channels | Yes |
| Scan Rate | 100 Channels per Second |
| Search Rate | 100 steps per second |
| IF Rejection | 70 dB |
| Banks | 10 |
| Trunking Capability | Yes |
| Frequency Steps | 5, 12.5 kHz |
| Modulation Modes | AM, FM |
| Step Size | 5 kHz |
| Frequency Range | 25-1300 MHz |
Details the scanner's ability to monitor various communication systems and trunking types.
Lists scanner band numbers, frequency ranges, modulation modes, and default step sizes.
Identifies and describes the functions of the scanner's front panel buttons and displays.
Details the various connectors and ports located on the rear of the scanner unit.
Explains the basic concepts of scanning, searching, and trunk tracking for radio communications.
Defines APCO Project 25 digital communications and its various system types.
Lists hotlines, clubs, and dealers for obtaining frequency information and guides.
Provides websites for additional scanner information and resources.
Guides on connecting and mounting the scanner's antenna for optimal reception.
Details how to power the scanner via vehicle or AC adapter.
Guides on connecting external speakers and earphones for improved audio.
Step-by-step instructions for physically mounting the scanner unit in a vehicle.
Instructions on powering on the scanner and adjusting the squelch control.
Explains how to access and navigate the scanner's menu structure and options.
Details service search options like weather, public safety, news, and broadcast frequencies.
Explains how to program and manage search ranges for discovering new frequencies.
Step-by-step guide to entering frequencies into scanner channels using the menu system.
Instructions for deleting, editing, and handling duplicate frequencies.
Guides on assigning alphanumeric tags to channels and banks for identification.
Steps to start scanning, manage banks, and use scan hold.
Methods to quickly select and listen to a particular channel.
Instructions on how to save frequencies encountered while the scanner is actively scanning.
Explains how to use RF attenuation to prevent signal overload.
Guides on configuring delay timers for scan/search pauses.
How to lock out unwanted channels while in hold mode.
Method to lock out channels during the active scanning process.
Process to unlock single or all previously locked-out channels in a bank.
Instructions on how to designate a new priority channel within a bank.
Guides on defining frequency ranges for the scanner's search function.
Guides on initiating and controlling continuous searches across multiple ranges.
Allows pausing search and skipping unwanted data transmissions.
Allows skipping frequencies during service search and configuring weather radio alerts.
Instructions for testing the scanner's alert siren for weather warnings.
Guides on programming FIPS codes for specific geographic areas for weather alerts.
Guides on selecting the correct trunking system type for tracking.
Guides on entering frequencies for trunked systems.
Explains how to create and manage lists of talkgroup IDs for trunked systems.
Allows pausing ID scanning on a specific talkgroup ID.
Explains how to monitor IDs and pause searches for interesting transmissions.
How to exclude unwanted traffic by locking out specific IDs.
Instructions on how to unlock single or all locked-out IDs.
Explains the reverse key function and setting delay modes for trunking.
How to set priority for talkgroups within trunking lists.
Guides on storing IDs into scan lists while actively searching.
Instructions for removing IDs and configuring I-Call reception.
Explains how the scanner tracks LTR trunked radio systems and their talkgroup IDs.
Details the two types of Motorola trunking systems (Type I and Type II) and how the scanner tracks them.
Guides on selecting pre-defined fleet maps for Type I/Hybrid systems.
Instructions for creating custom fleet maps for Motorola Type I/Hybrid systems.
Steps for configuring a hybrid trunking system with Type I and Type II blocks.
Details setting base, spacing, and offset frequencies for Motorola VHF/UHF systems.
Explains how to adjust the status bit setting for Motorola Type II systems.
Guides on using control channel data only for Motorola 800/900 MHz trunking.
Configures how the scanner returns to the control channel after a transmission.
Step-by-step guide for physically installing the APCO P-25 digital card.
Important safety and handling precautions before installing the P-25 card.
Instructions on how to enable or disable the installed APCO P-25 card.
Details connecting the scanner to a PC for programming and control via software.
Guides on initiating remote control and adjusting PC communication speed.
Explains how to transfer scanner programming to another unit.
Adjusts display brightness and reduces screen information for clarity.
Secures keypad input and controls audible key press feedback.
Explains reverse mode for repeaters and setting channel step sizes.
Guides on muting audio and selecting different receiving modes.
Details how to use the VFO knob for tuning frequencies or navigating channels.
General guidelines for operating and optimal placement of the scanner.
Instructions for safely cleaning the scanner and information on repairs.
Explains what birdies are and how to lock them out.
Lists common problems and suggested solutions for scanner operation.
Addresses issues encountered specifically within TrunkTracker mode.
Provides definitions of technical terms used in the scanner manual.
Provides pre-configured fleet maps for various trunking system types.
Details the number of fleets, subfleets, and IDs based on size codes.
Details restrictions on assigning specific size codes to blocks in fleet maps.
To Next Page
