What to do if my Uniden Radio has no reception?
If your Uniden Radio has no reception, try these steps: First, check the microphone connection. Next, ensure the CB/PA switch is set to CB. Then, check the VOLUME and SQUELCH levels. Verify the antenna and its connection. Finally, adjust the RF Gain.
What to do if my Uniden Radio has no transmission?
If your Uniden Radio has no transmission, make sure the CB/PA switch is set to CB. Check the microphone connection and adjust the MIC Gain.
Why is the reception so poor on my Uniden Radio?
If you are experiencing poor reception on your Uniden Radio, check the VOL and SQ settings. Ensure that the antenna SWR is normal. You might also need to adjust the RF Gain.
How to fix low transmission on Uniden Bearcat PC78LTD Radio?
If your Uniden Radio has low transmission, ensure the antenna SWR is normal. Also, adjust the MIC Gain.
What to do if my Uniden Bearcat PC78LTD Radio does not power up?
If your Uniden Radio doesn't power up, check the ignition key position, power cord connections, and the fuse. Also, inspect the vehicle's electrical system.
What to do if calibration does not move the meter needle to the left side on Uniden Bearcat PC78LTD Radio?
If the calibration does not move the meter needle to the left side on your Uniden Radio, adjust the antenna length and check all antenna connections.
General| Type | CB Radio |
|---|---|
| Channels | 40 |
| Modulation | AM |
| Power Output | 4 Watts |
| RF Gain | Yes |
| ANL | Yes |
| NB | Yes |
| SWR Meter | Yes |
| Instant Channel 9 | Yes |
| Antenna Impedance | 50 Ohms |
| Power Supply | 13.8 VDC |
| Frequency Range | 26.965 MHz - 27.405 MHz |
To Next Page