17
Privacy Mode
• To activate privacy mode on a call in progress, press MENU/
SELECT and select Privacy Mode. As long as privacy mode is on,
you’ll see a P in the display, and no other handsets can join your call.
• Privacy mode turns off automatically when you hang up; you can also
turn it off by pressing MENU/SELECT and selecting Privacy Mode.
Handset to Handset Intercom
• Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
• If an outside call comes in during an intercom page, the phone
cancels the page so you can answer the incoming call.
• If an outside call comes in during an intercom call, press TALK/
FLASH to hang up the intercom call and answer the outside call.
To... Press...
make an intercom page INTCOM/CLEAR
.
Select the handset
you want to talk with, or
All
to page all
handsets at the same time
cancel a page END
answer a page
INTCOM/CLEAR or TALK/FLASH
end an intercom call
END. Both handsets return to standby.
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 20 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press MENU/SELECT to send the code. If you change your mind, just
close the phonebook.
To Next Page
Loading...
Need help?
General
