To Next PageTo Next PageWhy doesn't my Uniden Cordless Telephone handset ring or receive a page?
If the Uniden Cordless Telephone handset doesn't ring or receive a page, the battery pack may be weak. Charge the battery on the base unit for 12-15 hours. The handset may also be too far away from the base unit. Try placing the base unit away from appliances or metal objects.
How to fix weak or scratchy audio on Uniden EXAI7980?
If the audio on your Uniden Cordless Telephone sounds weak or scratchy, ensure that the base unit antenna is in a vertical position. Try moving the handset and/or base unit to a different location away from metal objects or appliances. You can also press the button to help eliminate background noise. Also, make sure that you are not too far from the base.
What to do if my Uniden Cordless Telephone can't make or receive calls?
If your Uniden Cordless Telephone can't make or receive calls, check both ends of the base unit telephone line cord. Also, ensure the AC adapter is properly plugged into the base unit and the wall outlet. If the issue persists, disconnect the AC adapter for a few minutes, then reconnect it. You may also need to press the button.
What to do if the status light doesn't come on for my Uniden EXAI7980 Cordless Telephone?
If the status light on your Uniden Cordless Telephone doesn't come on when the handset is placed in the base unit, ensure the AC adapter is plugged into both the base unit and the wall outlet. Also, make sure the handset is properly seated in the base unit and that the charging contacts on both the handset and base unit are clean.
Why does Caller ID not display on my Uniden Cordless Telephone?
If the Caller ID does not display on your Uniden Cordless Telephone and the call was placed through a switchboard, call your local telephone company to verify your Caller ID service is current.
Why does the Caller ID disappear on my Uniden EXAI7980?
If the Caller ID disappears on your Uniden Cordless Telephone, it might be because the handset was picked up before the second ring.
General| Brand | Uniden |
|---|---|
| Model | EXAI7980 |
| Category | Cordless Telephone |
| Language | English |
Lists the key capabilities and specifications of the Uniden EXAI 7980 cordless telephone.
Essential initial steps before operating the cordless telephone, including unpacking, base setup, battery, and Caller ID.
Explains the function and purpose of the digital security code for the phone.
Verifies all included items are present in the telephone package.
Contact information for obtaining replacement parts or assistance from Uniden.
Provides guidelines for selecting an optimal location for the telephone base unit.
Step-by-step instructions for connecting the telephone base unit to power and the phone line.
Instructions for setting the TONE/PULSE switch based on the local dialing system.
Detailed steps for inserting the battery pack into the handset and initial charging.
Information regarding battery life from a full charge and standby duration.
Handling low battery status and cleaning battery contacts for optimal charging.
Configuration settings for Auto Talk, CIDCW, and Area Code features.
Procedure to input the local area code for proper Caller ID operation.
Instructions for initiating a call when the handset is idle.
Minor operations related to making calls, such as improving reception or adjusting volume.
How to make a call when the handset is already in use or off the base.
Steps to redial the last number dialed using the redial key.
Process for answering an incoming call using the handset.
Explanation of Auto Talk and how to handle incoming calls during an active call.
Instructions to select ringer sound and adjust earpiece volume during a conversation.
Procedure for answering calls using the base unit's speakerphone.
Control for base ringer and adjusting base speaker volume.
Guide to saving phone numbers and associated names into the phone's memory.
Continues instructions on storing contact information, including names and numbers.
How to initiate calls using the stored memory locations.
Instructions on how to view stored phone numbers and their associated names.
Steps to modify existing contact information stored in memory.
Further details on editing stored contact information, including numbers and names.
How to view programmed numbers and toggle between names and numbers.
Guide on how to delete stored contact information from the phone's memory.
Instructions on how to locate the handset using the page function.
Describes how Caller ID information is displayed when a call is incoming.
How to access and review the list of incoming calls stored by Caller ID.
Procedures for setting or cancelling the long distance call prefix '1'.
Steps to manually delete individual incoming call records from the Caller ID list.
Instructions to clear all stored Caller ID records from the phone.
How to initiate a call directly from an entry in the Caller ID list.
Guide on saving incoming call details from the Caller ID list to memory dialing.
How to manage incoming calls when using Caller ID and call waiting service simultaneously.
Procedure for setting the current time and date on the answering machine.
Instructions for recording a personalized greeting message for the answering machine.
Steps to switch between a recorded greeting and the pre-recorded message.
How to activate or deactivate the answering system functionality.
Configuration options for the number of rings before the answering system answers.
Adjusting the maximum duration for recorded incoming messages.
Steps for listening to saved messages on the answering machine.
Instructions for removing saved messages from the answering machine.
How to listen to callers leaving messages through the base unit speaker.
Guide on recording short voice messages for household members.
How to record a conversation that is currently in progress.
Steps to set a two-digit Personal Identification Number for remote access.
Instructions for operating the answering system remotely via phone.
How to listen to sounds in the room where the base unit is installed remotely.
Guide on remotely activating the answering machine from a touch-tone phone.
Instructions for establishing and managing three-way conversations.
Procedure to reset the digital security code connecting the handset and base unit.
Detailed steps for mounting the telephone base unit onto a wall plate.
Alternative method for mounting the phone directly to a wall without a plate.
Instructions for attaching beltclip and connecting headset to the handset.
Information regarding battery replacement, handling, and power failure.
Cleaning instructions for the telephone unit under various conditions.
Provides solutions for common issues encountered with the cordless telephone.
Continues to offer solutions for various operational problems with the phone and answering system.
