Need help?Do you have a question about the Uniden Guardian App Cam Solo and is the answer not in the manual?
General| Image Sensor | 1/2.9" CMOS Sensor |
|---|---|
| Focal Length | F=2.2 |
| Angle of View Diagonal: | 130° (diagonally) |
| PIR Detecting Distance | Low: 2-4 Meters, Mid: 4-6 Meters (Default), High: 6-9 Meters |
| Minimum Illumination | 0 Lux (with IR Illuminator) |
| IR Distance | Up to 10 meters |
| Image Compression Technology | H.264 |
| Maximal Frame Rate | 15fps |
| Record Mode: | PIR Alarm Record |
| Display Resolution | 1920 x 1080 (2.0Megapixel) |
| Network Protocols & Standards | SSL, SMTP, DHCP, P2P |
| Bit rate | 768Kbps ~ 2048Kbps |
| Maximal User Access | 8 |
| Wireless Standard | IEEE 802.11b/g/n |
| Operating Frequency | 2.4GHz |
| Wireless Security | WEP/WPA-PSK/WPA2-PSK |
| Audio | Two-Way Audio |
| Supported Smart Phone: | iOS, Android |
| Battery Requirement | 4 Lithium CR123A |
| Standby time | Up to 6 Months |
| Operating Temperature | -10 ° ~ + 55 ° |
| Operating Humidity | 20% ~ 85% |
| IP Rating | IP65 |
Specifications for optimal wireless performance and signal reception.
Details the physical components, working modes, and LED status indicators.
Guides on how to add a new camera to the app via QR code or UID.
Explains the camera's 130° diagonal viewing angle and optimal distance.
How to enable/disable push notifications and control PIR/audio/email alerts.
Explains the icons and controls for viewing live video feeds from the camera.
Configuration options for the PIR motion sensor, including scheduling.
Specifies the capacity, speed, and format requirements for the microSD card.
To Next Page